Following are 12 Frequently Asked Questions about the airbrush and airbrush technique. These have been compiled from various letters and e-mails sent to ARTtalk.com, AirbrushTalk.Com, and airbrush manufacturers.

What is an airbrush?
How does an airbrush work?
What type of airbrush is best for me?
What types of surfaces can be worked on?
What is masking?
When is it appropriate for me to use an airbrush in my own work?
What kinds of paint can I use with the airbrush?
Are airbrushes hard to clean?
Is airbrushing safe?
What types of air sources are available?
How much air is necessary to operate an airbrush?
Are instructional books and videotapes available on the airbrush and techniques?

1. What is an airbrush?

An airbrush is a small, air-operated tool that sprays fluid (paint, ink, dye, stain, glaze, etc.). It resembles, and is held like, a pen.
Back To Top

2. How does an airbrush work?

The airbrush must be attached to an air source to spray. The artist turns on the airbrush by depressing a trigger, which on most airbrushes regulates the amount of paint delivered. As the artist pulls back on the trigger, a combination of air and paint are sprayed.
Back To Top

3. What type of airbrush is best for me?

This depends on your desired application. Most artists today use single or dual action, internal mix airbrushes because they offer the most control and the finest of sprays. However, single action, external mix airbrushes are very popular for hobby and craft applications, the spraying of ceramic glazes or high viscosity materials, or where cost is a factor. (They are less expensive.)
Back To Top

4. What types of surfaces can be worked on?

All surfaces can be airbrushed paper, canvas, plastic, metal, glass, wood, leather, skin, etc. The key is to insure that the material sprayed is compatible with the surface.
Back To Top

5. What is masking?

Masking--or in airbrush vernacular, frisketing--is any system in which you block spray from invading a specific area of an artwork or surface with some type of stencil, masking material, frisket film, template, tape, or found object.
Back To Top

6. When is it appropriate for me to use an airbrush in my own work?

Anytime, but particularly when you want to achieve a soft look with no visible brush strokes.
Back To Top

7. What kinds of paint can I use with the airbrush?

All paints are sprayable (oils, acrylics, watercolors, automotive paints, enamels, alkyds, etc.) as long as they are thinned to a consistency that enables them to flow easily through the airbrush.
Back To Top

8. Are airbrushes hard to clean?

No, it's quite a simple task. But it is important to develop a habit of regular maintenance by flushing with the appropriate cleaning agent for the paint or material that is being sprayed. The airbrush should be cleaned between color changes, with a thorough cleaning at the end of the workday.
Back To Top

9. Is airbrushing safe?

Yes, but use a common sense approach. Remember that you are spraying materials into the environment and neither you nor anyone else should inhale them. It is essential to work with good ventilation and exhaust fans (if not an airbrush spray booth) and to wear a carbon filter respirator when spraying toxic materials such as automotive paint.
Back To Top

10. What types of air sources are available?

Three different types of air sources may be used with the airbrush. First is the airbrush compressor; next is a carbonic gas tank (CO₂ or nitrogen); and third is the propellant can (for limited applications).
Back To Top

11. How much air is necessary to operate an airbrush?

As a rule of thumb, you need « cubic foot of air (cfm) at 30 pounds per square inch (psi) to propel an airbrush. You can work at lower or higher pressures, depending on the materials sprayed and the effects desired, but the cfm requirement remains the same.
Back To Top

12. Are instructional books and videotapes available on the airbrush and techniques?

There are many books on the market on airbrush technique, particularly those that discuss basics, as well as an array of videotapes. Your local art materials supply store will have them in stock. There is also a basic introductory course in airbrush technique located online at http://www.airbrushtalk.com/.
Back To Top